Pora Electric Machinery Co., Ltd.

PR-DPA-450C Digital strip position amplifier

PR-DPA-450C are controllers that can control both CPC/EPC.

They are compatible with all of our CPC/EPC sensors.

Can be combined with a servo hydraulic unit to build an automatic control system.
(※Electrostatic Discharge KN6100-4-2 Level 3 passed)

Product specification

Product Information

Related Products

PR-T 7.5HP/10HP Hyd unit Type
7.5~10HP Hydraulic Unit

PR-T 7.5HP/10HP Hyd unit Type 7.5~10HP Hydraulic Unit

Premium unit.
Standby motor and pump are installed so that they can work continuously in case of the failure of motor or pump.
High-precision servo valves, servo valves dedicated filters, various alarms and signal output functions are installed.

Products of interest Data room
PR-T 5HP/7.5HP Hyd unit Type
5~7.5HP Hydraulic Unit - Standard type

PR-T 5HP/7.5HP Hyd unit Type 5~7.5HP Hydraulic Unit - Standard type

Popular unit.
High-precision servo valves and servo valves dedicated filters are installed.

Products of interest Data room
PR-T 2HP/3HP Hyd unit Type
2~3HP Hydraulic Unit

PR-T 2HP/3HP Hyd unit Type 2~3HP Hydraulic Unit

Premium unit.
High-precision servo valves, servo valves dedicated filters, various alarms and signal output functions are installed.

Products of interest Data room
PR-TS2(TS3) 2HP Hyd unit Type
2HP Hydraulic Unit

PR-TS2(TS3) 2HP Hyd unit Type 2HP Hydraulic Unit

Popular unit.
High-precision servo valves and servo valves dedicated filters are installed. (TS2: PR-SV-50G, TS3: MOOG)

Products of interest Data room
PR-TS1 1HP/2HP Hyd unit Type
1~2HP Hydraulic Unit

PR-TS1 1HP/2HP Hyd unit Type 1~2HP Hydraulic Unit

Popular unit.
We produce valves for proportional control by ourselves to supply. (PR-SV-403)

Products of interest Data room
PR-ELS Type
Stick Type Position Detector

PR-ELS Type Stick Type Position Detector

PR-ELS Type converts a linear movement of the reel or guides into a current value.
The precision linear element embedded can accurately detect the position.

Products of interest Data room
PR-LS Type
Stick Type Position Detector

PR-LS Type Stick Type Position Detector

PR-LS Type converts a linear movement of the reel or guides into a current value.
The precision linear element embedded can accurately detect the position.

Products of interest Data room
PRE-SWL Type
WL Type

PRE-SWL Type WL Type

Optical EPC sensor using photo diodes.
This sensor measures one edge of the strip and induces the strip to be always wound with one side evenly aligned.

Products of interest Data room
PRE-SW Type
W Type

PRE-SW Type W Type

Optical EPC sensor using photo diodes.
This sensor measures one edge of the strip and induces the strip to be always wound with one side evenly aligned.

Products of interest Data room
PR-LD Type
Optical LED Light Device

PR-LD Type Optical LED Light Device

Equipment that uses high-intensity LEDs to emit light stably and regularly.
It is characterized by combining with optical sensors (PR-OPS, PR-OPS2, PR-OPD and PR-LSC-21) to build EPC and CPC systems, and a service life is superior to the existing fluorescent lamps.

Products of interest Data room
PR-LSC-21 (28mm / 50mm)
Linear Scan Camera

PR-LSC-21 (28mm / 50mm) Linear Scan Camera

A Linear Scan Camera sensor is a Color CCD Image Sensor that can precisely measure location, width, length, and so on.
As the product is small and light, it can be attached anywhere and is capable of precision detection.
For the light emitting part, high flux LED which boasts a long service life is used, not an existing fluorescent lamp.
Use in combination with PR-LD series.

Products of interest Data room
PR-OPD Type
Optical Type

PR-OPD Type Optical Type

Optical CPC sensor using photo diodes.
A sensor that measures one end of a strip to guide so that one side of the strip can always be wound uniformly, or to guide so that the strip is placed in the middle.
It can control fabrics with various heights of length, middle and short length, various widths, and it is precise with high accuracy, and also robust against nearby scattered reflection.
Use in combination with PR-LD series.

Products of interest Data room
PR-OPS2 Type
Optical Type

PR-OPS2 Type Optical Type

Optical CPC sensor using photo diodes.
A sensor that measures one end of a strip to guide so that one side of the strip can always be wound uniformly, or to guide so that the strip is placed in the middle.
It can control fabrics with various heights of length, middle and short length, various widths, and it is precise with high accuracy, and also robust against nearby scattered reflection.
Use in combination with PR-LD series.

Products of interest Data room
PR-OPS Type
Optical Type

PR-OPS Type Optical Type

It is an optical EPC sensor using photodiodes.
It measures one end of a strip, and guides to always wind one side of the strip uniformly.
It is capable of controlling fabrics with different height of long, medium, short length and different width, precise with high accuracy and also proof against nearby scattered reflection.
Use in combination with PR-LD series.

Products of interest Data room
PR-SMI Type
Inductive Type

PR-SMI Type Inductive Type

This is an inductive type sensor which detects metal objects (aluminum, nickel, magnesium, stainless steel or copper) between the sensors by checking the amplitude and characteristics of change generated by the metal disturbing electromagnetic field.
It precisely induces the coil to the center of the equipment without being interfered even when the detection part of the sensor is exposed to strong light, cutoff, or contaminated by substances other than metal.

Products of interest Data room
PR-PMI2 Type
Inductive Type (High Performance

PR-PMI2 Type Inductive Type (High Performance

This is an inductive type sensor which detects metal objects (aluminum, nickel, magnesium, stainless steel or copper) between the sensors by checking the amplitude and characteristics of change generated by the metal disturbing electromagnetic field. It precisely induces the coil to the center of the equipment without being interfered even when the detection part of the sensor is exposed to strong light, cutoff, or contaminated by substances other than metal.

Products of interest Data room